Buy GM340 for the company: kit and comparison of the KP

Start with the workplace you are equipping.

In the application, name the unit and task: radio communication on equipment, replenishment of the existing fleet or a separate workplace. Write down which stations are already in use and who is in charge of communication. The supplier will be able to separate the purchase of a particular device from the selection of additional equipment and work. This reduces the number of clarifications between the buyer, technician and recipient.

For the existing network, attach a photo of the station marking and configuration information from the company documentation. The GM340 comes in different ranges. VHF 136–174 MHz and UHF 403–470 MHz are listed separately. In the CP, they should remain different positions, even if the appearance of the hulls is the same. Configure the configuration before the invoice is agreed.

Characteristics that are useful in harmonization

The primary specification of GM340 specifies six memory channels and output power of 1–25 W for the VHF/UHF configuration. The six channels refer to the station’s capabilities, not the guarantee of the simultaneous operation of the six groups. Data power supply and selected configuration to the specialist of the enterprise to check the workplace.

Four positions of the basic set

In the list of equipment for both positions GM340 called bracket, manipulator and power supply cable. Motorola’s primary specification also lists power supply cable, compact microphone, and low profile mounting as standard accessories. This is a useful basis for the application; the composition of a particular proposed batch is fixed by a separate specification, with exact codes of the accessories included.

If you only need the main unit to replace, expressly indicate this task. If you need a complete set, list all four lines. For the organization, these are different purchases: the first uses already existing accessories, the second must provide each ordered device with an agreed set. Specify which positions are available in the workplace and which need to be added.

What to do separately

The antenna is selected for configuration stations and location. power supply, mounting, equipment preparation and delivery should also be visible in the quotation. For the equipment, report the parameters of the onboard network; for another workplace, transmit information about the available power supply. The technical solution is confirmed by the responsible specialist. The article on the purchase helps to make a request, and the installation is carried out according to the agreed documentation.

The total price of the device without decoding the composition does not help much when choosing a delivery. Ask for equipment, additional supplies, coordinated work and logistics. So you can compare two KPs on the same volume. If part of the work is performed by your service, note this in advance: it will be easier for the supplier to calculate the items ordered.

Availability, condition and schedule of delivery

The GM340 is included in the Owner’s list of equipment. This document helps to select a product, but the current availability of a specific configuration is confirmed in a dated PC. In response, request the amount for your application, the status of the party, the composition, the validity period of the quotation and the agreed schedule. The photo of the case shows the model and does not replace the confirmation of copies to order.

The GM340 designation is found in equipment with different operating history. Conditions, checks and warranty service write in the quotation for your party. For the buyer, a document is important, according to which you can accept the agreed equipment and contact the service issue. Discuss the terms of a particular order before payment.

Order GM340 in Moscow

For delivery to Moscow, specify the recipient’s address, organization, contact of reception and requirements for accompanying documents. For multiple places of receipt, add the distribution of quantity. The cost and delivery time are agreed together with the scope of supply. Under current conditions GM340.ru equipment is sent by the transport company in Russia and Kazakhstan; a specific route is included in the quotation.

What to send for the first calculation

Prepare one letter: model and configuration, number, task, known composition, additional accessories, receipt address and contact technician. Attach the marking of the existing station if the selection is tied to the existing park. Ask for answers on each line: supplied position, kit, current availability, conditions and schedule. Such an application becomes the basis of the verified specification.

Documentation for configuration and standard accessories: Primary specification Motorola GM340. The actual party is determined by the agreed quotation.

Questions before ordering

How to check GM340 before ordering?

Request a dated KP for a specific configuration with the amount under your order. The old list of equipment and the model photo do not confirm today’s remainder.

Antenna is in every delivery?

On the order page, the antenna is selected separately. Its configuration and inclusion in your delivery will be agreed in the specification.

Can I order the main unit without accessories?

Specify this volume directly in the request. The composition of the proposed batch and the compatibility of existing accessories will be confirmed separately.

Card HKN4137 · Motorola GM340 VHF · Motorola GM340 UHF · How to order

Procurement materials

• GM340 batch for divisions: Procurement statement
• HKN4137 to GM340: Power supply cable and order composition
• GM340 for the company: acceptance of the batch according to the specification