Purchase PMLN5072 for assembly of a batch of harnesses: details, sample and completeness
When an enterprise assembles several identical connections to the radio, the accessory connector set becomes a production component. In our card PMLN5072 You can request this position. For the purchase of a lot, it is important to determine the composition of the set, the need for each assembly and the accepted sample of the tourniquet. Then the assembly group will receive agreed details for the repeatable result.
First, approve one type assembly.
Start with the radio model, external equipment and the applicable circuit. For each option, determine your tourniquet: what devices it connects, where the cable passes and what functions it should provide. The same radio name does not replace this scheme if different cabinets use different peripherals.
Motorola describes how PMLN5072A as a set of rear accessory connector; among the models on the page are given DM4400/DM4401. In our catalog, it's listed. PMLN5072. For purchase, keep the full code of the proposed product and its compliance with the exact station, without reducing the suffixes in the assembly sheet.
If the standard tourniquet is already made, attach its designation, scheme and photos of both ends. If the assembly is only designed, determine the responsible contractor and the result of the first sample inspection. A set of parts becomes a subject purchase after it is clear which assembly it is included in.
Disassemble the set into the checked positions
Ask for a list of components of the proposed set with the number. This will allow you to understand what parts are issued in one set and what you need to buy separately. The composition in the photo and the composition of the current delivery must be linked by a document, especially when re-ordering another batch.
| Item of the statement | What needs to be established |
|---|---|
| PMLN5072 kit | Full article and composition of the proposed configuration |
| Contact elements | Symbols, quantity and applicability of documentation |
| Body and fixation elements | Completeness for the selected assembly |
| Cable and second connector | Individual positions of the tourniquet according to the approved scheme |
| Additional accessories | What is included in the set and what the performer acquires separately |
Such a statement does not specify the device of any PMLN5072. It helps to check the quotation for specific details. If the supplier proposes to replace the component, the change must fall into the agreed assembly composition before the batch is manufactured.
Number of sets associated with the release of harnesses
Divide the need for ready products, agreed spare assemblies and components for further maintenance. The amount of radio in the park does not determine the order: some devices already have a serviceable connection, and others can use different versions of tourniquets.
For each assembly, write down the planned number and consumption of agreed sets. Additional details for manufacturing or maintenance should be taken into account according to the process accepted by the enterprise. The universal percentage of stock here is inconvenient to assign: the need depends on the composition of the product, the organization of assembly and actual replacements.
In quotation it is convenient to keep the price and composition of one set unit separately from the works and other components of the tourniquet. Then the cost of a new batch can be recalculated by the number of products, without imperceptibly changing its completeness.
The sample should check the entire bundle.
Before serial production, coordinate the check of the first tourniquet at the specified station and external device. The contractor checks the assembly with the applicable documentation, then performs the functions provided for by the project. The result of the check is stored together with the scheme and designations of the used parts.
A photograph of a properly assembled body does not confirm the purpose of the connected lines. Electrical conditions, conformity of contact elements and necessary means of assembly are determined by the documentation of products. This technical guide helps to formalize the purchase; a specific assembly technology is established by the responsible installation organization.
| Manufacturing phase | What document is useful for repetition |
|---|---|
| Selection of components | The agreed composition of the set and other details of the harness |
| First sample | Scheme, assembly designation and verification details |
| Product batch | Amount and control of conformity to the accepted sample |
| Transfer to facilities | Distribution of assemblies by stations and external devices |
Consignment and re-ordering
When receiving sets, the full code, completeness and agreed state are checked. If components are supplied in separate packages, their distribution should allow the quantity to be verified on the record. Differences from the previously accepted batch are considered before transferring parts to the assembly.
For re-purchase, save two designations next to each other: the article of the set and the internal code of the finished tourniquet. The first helps to order parts, the second - to restore the desired assembly and its purpose. If you change the station, periphery or cable route, update the documentation of the corresponding option.
Other positions remain separate
HLN9457 are considered for another agreed accessory connection. HKN4137 It is a power supply station cable. These items are conveniently included in the general statement of the project, retaining their purpose and independent grounds of choice. The PMLN5072 is not a replacement for all connectors and power cables.
To receive in St. Petersburg, Nizhny Novgorod, Pavlodar or another city of Russia and Kazakhstan, send a typical assembly, the required number of sets and address. According to these data, we agree on the proposed configuration, availability, cost and term. Request KP for PMLN5072 batch.
Questions before buying
Do you need to choose the number of radio sets?
Consider the need for the planned harnesses and their agreed composition. Correct existing connections, different assemblies and stock for maintenance are taken into account separately.
Is it enough of a photo set to start a serial assembly?
You need a full code, a list of parts, an applicable diagram and documentation of the station and external device. The photo helps to see the composition, but does not determine the electrical connection.
What can I save for reordering?
The article of the set, the composition of the parts, the internal code of the tourniquet, the scheme, the designations of the connected devices and the results of checking the accepted sample.
Open PMLN5072 in the directory · Send a full application.
Manufacturer's documentation
Main Goods and Related Positions
Each position is ordered separately for your task. Compatibility and configuration are agreed for a specific set.
